Table of Contents
Advertisement
General problems or technical faults
Problem
The combination steam
oven cannot be
switched on.
The oven interior lighting
is not working.
The control panel will
not open or close auto-
matically despite the
sensor control being
touched several times.
Cause and remedy
The circuit breaker has tripped.
Reset the trip switch in the circuit breaker box (see
data plate for minimum protection rating).
There may be a technical fault.
Disconnect the combination steam oven from the
electrical supply for approx. 1 minute by:
– Tripping the relevant mains fuse or unscrewing
the fuse completely, or
– Switching off the residual current device
If, after resetting the trip switch in the mains fuse
box or the residual current device, the combination
steam oven will still not turn on, contact a qualified
electrician or the Miele Customer Service Depart-
ment.
The lamp is defective.
Call Miele Service to have the lamp replaced.
Something is obstructing the control panel.
Remove the obstruction.
The obstruction sensor is very sensitive, which means
the control panel sometimes does not open or close.
Open/close the control panel manually (see end of
this section).
If the problem occurs frequently, contact the Miele
Customer Service Department.
Problem solving guide
161
Advertisement
Table of Contents
