Using Run and Walk Alerts
NOTE: You must set up the run/walk interval alerts before starting a run. After you start the run timer, you
cannot change the settings.
1 Press START.
2 Select a running activity.
NOTE: Walk break alerts are available only for running activities.
3 Hold UP.
4 Select the activity settings.
5 Select Alerts > Add New > Run/Walk.
6 Set the run time for each alert.
7 Set the walk time for each alert.
8 Go for a run.
Each time you complete an interval, a message appears. The watch also beeps or vibrates if audible tones are
turned on
(System Settings,
until you turn it off or enable a different run mode.
Enabling Self Evaluation
When you save an activity, you can evaluate your perceived effort and how you felt during the activity. Your self
evaluation information can be viewed in your Garmin Connect account.
1 Hold UP.
2 Select Activities & Apps.
3 Select an activity.
4 Select the activity settings.
5 Select Self Evaluation.
6 Select an option:
• To complete self evaluation only after workouts, select Workouts Only.
• To complete self evaluation after every activity, select Always.
History includes time, distance, calories, average pace or speed, lap data, and optional sensor information.
NOTE: When the device memory is full, your oldest data is overwritten.
38
page 73). After you turn on the run/walk alerts, it is used each time you go for a run
History
History