HP Fortis x360 G5 Chromebook Maintenance And Service Manual page 37

1. Remove the four Phillips M2.0 × 2.5 screws (1) from the touchpad bracket, and then remove the
bracket (2).
2. Remove the tape (1) from the touchpad.
3. Disconnect the cable from the ZIF connector (2) on the touchpad.
4. Lift the protective tape (3) that covers the screws at the top of the touchpad.
5. Remove gray conductive tape (4) from touchpad.
6. Remove the three Phillips M2.0 × 2.5 screws (5) from the touchpad.
7. Remove the touchpad (6) from the computer.
32 Chapter 5 Removal and replacement procedures for authorized service provider parts