3.
Remove the speakers (3) from the computer.
To install the speakers, reverse this procedure.
Lock bracket
To remove the lock bracket, use these procedures and illustrations.
Before removing the lock bracket, follow these steps:
1.
Prepare the computer for disassembly
2.
Remove the bottom cover (see
3.
Remove the battery (see
4.
Remove the system board
Remove the lock bracket:
■
Remove the Phillips M2.0 × 3.0 screw (1), and then remove the lock bracket (2).
To install the lock bracket, reverse this procedure.
44
Chapter 5 Removal and replacement procedures for authorized service provider parts
(Preparation for disassembly on page
Bottom cover on page
Battery on page
29).
(System board on page
28).
40).
28).