Location Setup; Lifting - Patterson-Kelley P-K STORM ST-8000 Installation And Owner's Manual

2.4 Location Setup

Lifting

The STORM 2500-8000 can be lifted by two methods. Lifting lugs attached to the heat exchanger,
shown in figure below, can be used to lift the unit. A variety of rigging equipment may be required to
properly lift the unit using the lifting lugs.
NOTE: Do NOT allow any rigging equipment to interfere with unit components as this can
damage the unit
Revised: February 2, 2024
Released: February 2, 2024
 Patterson-Kelley 2024
All Rights Reserved.
®
P-K Storm Gas Fired Boiler
Technical Service 1.877.728.5351
2691000403 P-K Storm ST2500-ST8000
Installation and Owners Manual Rev G.docx
Page 4