X-TRACTOR ® 3A
REMOVAL AND REPLACEMENT PROCEDURE
REMOVAL PROCEDURE
1. Remove input power to the X-Tractor 3A.
2. Perform the Case Cover Removal Procedure.
3. Locate the digital solenoid Timer. See Figure F.19.
4. Using a slotted screwdriver, loosen the screw securing the digital
solenoid timer plug. See Figure F.20.
5. Disconnect the digital solenoid timer plug.
6. Disconnect the digital solenoid timer from the solenoid coil. See
Figure F.21. Note rubber washer placement for reassembly.
7. Remove digital solenoid timer from machine.
DIGITAL SOLENOID TIMER
Figure F.19 – Digital solenoid timer location
F-38
TROUBLESHOOTING AND REPAIR
(continued)
DIGITAL SOLENOID
TIMER