Lincoln Electric X-TRACTOR 3A Service Manual page 20

X-TRACTOR ® 3A
CASE COVER REMOVAL AND REPLACEMENT PROCEDURE
REMOVAL PROCEDURE
1. Remove input power to the X-Tractor 3A.
2. Using a 1/4" nutdriver, remove the four screws (two on each side)
securing the case cover. See Figure F.1.
NOTE: For fast access to internal components only remove the two
front screws (one on each side) from the case cover. The
cover can now be carefully tilted to rest on the floor. See
Figure F.2.
3. Carefully remove cover from machine.
Figure F.1 – Case cover removal
MOUNTING SCREWS
(TWO ON EACH SIDE)
F-6
TROUBLESHOOTING AND REPAIR
(continued)