Lincoln Electric X-TRACTOR 3A Service Manual page 21

X-TRACTOR ® 3A
CASE COVER REMOVAL AND REPLACEMENT PROCEDURE
REPLACEMENT PROCEDURE
1. Carefully position cover on to machine.
NOTE: Skip step two if cover was simply tilted for internal component
access. See Figure F.2.
2. Using a 1/4" nutdriver, attach the two screws securing front of the
case cover to the machine.
3. Using a 1/4" nutdriver, attach the two screws securing the rear of
the case cover.
Figure F.2 – Case cover tilted
F-7
TROUBLESHOOTING AND REPAIR
(continued)