Remove the door cover .
5.
Lift out the inner pane
6.
on a flat surface.
Lift out the intermediate pane
7.
carefully on a flat surface.
Open the appliance door and remove the door seal.
8.
If necessary, you can remove the condensate
9.
trough for cleaning.
Open the appliance door.
‒
Tilt the condensate trough upwards and remove
‒
it.
and set it down carefully
and set it down
10.
WARNING ‒ Risk of injury!
Scratched glass in the appliance door may develop
into a crack.
Do not use any harsh or abrasive cleaners or
▶
sharp metal scrapers to clean the glass on the
oven door, as they may scratch the surface.
Clean the removed door panels on both sides with
glass cleaner and a soft cloth.
Clean the condensate trough with a cloth and hot
11.
soapy water.
Clean the appliance door.
12.
→ "Suitable cleaning agents", Page 20
Dry the door panels and refit them.
13.
→ "Fitting the door panes", Page 25
20.4 Fitting the door panes
WARNING ‒ Risk of injury!
The hinges on the appliance door move when the door
is opened and closed, which could trap your fingers.
Keep your hands away from the hinges.
▶
Components inside the appliance door may have sharp
edges.
Wear protective gloves.
▶
Open the appliance door fully.
1.
Place the condensate trough vertically into the re-
2.
tainer
and turn it downwards.
Slide the intermediate pane into the left- and right-
3.
hand retainers .
Appliance door en
25