Pride JAZZY1107 Owner's Manual page 28

V . C O M F O R T
Foot Platform Height Adjustment
The foot platform height is easily adjusted to different
heights in 1.27 cm. (0.50 in.) increments.
To raise or lower the foot platform:
1. Remove the quick release fasteners from the foot
platform bracket. See figure 20.
2. Raise or lower the foot platform to the desired height.
3. Reinstall the quick release fasteners into the foot
platform bracket and tighten.
Foot Platform Depth Adjustment
To adjust the foot platform depth:
1. Remove the quick release fasteners from the foot
platform bracket. See figure 20.
2. Move the foot platform in or out to the desired depth.
3. Reinstall the quick release fasteners into the foot
platform bracket and tighten.
Quick Release Fasteners
The foot platform is attached to the power base with
two quick release fasteners. See figure 20. Each quick
release fastener consists of a bolt, a lever and a nut.
See figure 21. The lever has a cam on the end that
allows it to clamp into place. The quick release fas-
tener has two states: clamped and unclamped. When
the lever is open, the quick release fastener is unclamped.
When the lever is closed, the quick release fastener is
clamped.
To clamp the quick release fastener:
1. Make sure the lever is in the open position.
2. Turn the nut clockwise until it is snug.
3. Rotate the lever until it is in the fully closed position.
NOTE: If the lever will not rotate to the fully closed
position, then turn the nut anticlockwise one-quar-
ter or one-half turn.
28
A D J U S T M E N T S
FOOT
PLATFORM
BRACKET
Figure 20. Foot Platform Adjustment
Figure 21. Quick Release Fastener Operation
www.pridemobility.com
NUT
BOLT
LEVER (OPEN)
UNCLAMPED
QUICK RELEASE
FASTENERS
CAM
LEVER (FULLY CLOSED)
CLAMPED
Jazzy 1107