Pride JAZZY1107 Owner's Manual page 20

I I I .
Manual Freewheel Levers
Your power chair has a manual freewheel lever on each motor. See figure 6. Manual freewheel levers enable you to
disengage the drive motors from the gearboxes and manoeuvre the chair manually.
To engage or disengage the drive motors:
1. Locate the lever on top of each motor.
2. Pull the two levers upward to engage the drive motors (drive mode). See figure 8.
3. Push the two levers downward to disengage the drive motors (freewheel mode). See figure 9.
If a lever is difficult to move in either direction, slightly rock the power chair back and forth. The lever should then move
to the desired position.
WARNING! Do not use freewheel lever handles as tie-down points to secure this product.
MANUAL FREEWHEEL LEVER
Figure 8. Drive Mode (Drive Engaged)
20
Y O U R
WARNING! Do not use the power chair while the drive motors are disengaged! Do not
disengage the drive motors when the power chair is on an incline or decline, as the
unit could roll on its own. Only engage the freewheel mode when on a level surface.
WARNING! It is important to remember that when your power chair is in freewheel
mode, the braking system is disengaged.
www.pridemobility.com
P O W E R
MANUAL FREEWHEEL LEVER
Figure 9. Freewheel Mode (Drive Disengaged)
C H A I R
Jazzy 1107