Pride JAZZY1107 Owner's Manual page 18

I I I .
SIDE TRAPEZE BARS
MANUAL FREEWHEEL
LEVER
MOTOR/BRAKE ASSEMBLY
Figure 6. The Jazzy 1107 Power Base
Electrical Components
The electrical components consist of the controller assembly, the batteries and the motors. The batteries, motors and
controller power module are located on the power base assembly. See figures 6 and 7. The controller is located on the
seat assembly. Connectivity between the controller and the motors, the batteries and the battery charger is provided by
one or more wiring harnesses.
Controller Harness Connector: The controller harness connector is where the controller plugs into the power base.
Each controller uses a different type of harness. If the controller has a power module in the power base, the connector is a
small communications-type connector. If the controller is integrated, then the harness has a large 9-pin connector. Regardless
of which type of controller is used, the harness must be secured to the seat assembly and not allowed to drag on the floor.
Battery Harness Connector: This is where the controller connects to the battery boxes.
18
Y O U R P O W E R
BATTERY BOX
BATTERY BOX
www.pridemobility.com
C H A I R
FRONT TRAPEZE BAR
CONTROLLER
CONNECTOR
Jazzy 1107