Cleaning And Maintenance - Concept2 OV2000 Instructions Manual

Warning:
• The efficiency of the unit is influenced by the air quality in the room of operation. To get the best results when
dehumidifying, do not open and close the windows and doors too often.
• Use the dehumidifier in the designated operation temperature to ensure proper functionality of the unit. For safety
reasons, dehumidification automatically stops and the air purification function is launched instead if the ambient
temperature rises above than 36 °C.
• When putting the unit in operation, the circulation of the coolant inside the appliance may produce noises. As the
circulation stabilizes, the noise level decreases.
HOW TO SELECT THE RIGHT MODE
Purpose
To reduce humidity in the room to a comfortable value.
(Do not place the dehumidifier near the walls to prevent
mould build-up.)
During night time.
For quicker drying of the wet laundry.
Dehumidifying in the cabinet
To dehumidify a small space or to dry shoes.
To dehumidify a small bathroom.
Once set, the built-in microcomputer stores the selected operating mode in memory. Press the button and the unit
will repeat the same operating mode. (In case of blackout or disconnection from the mains, it is necessary to set the
unit again.)

CLEANING AND MAINTENANCE

• To prevent electric shock, never connect or disconnect the plug with wet hands
• Prior to cleaning or maintenance, first switch the appliance off and disconnect it from the mains.
• Do not remove the float lever from the water tank.
• To prevent device malfunctions or excessive noises, keep the unit in the upright position.
• Wipe the body of the appliance with a soft, dry cloth.
• Use a soft, moist (well wringed out) cloth to remove larger dirt deposits. Never use a damp cloth to clean the control
panel.
• To avoid any deformation or cracking, do not use gasoline, thinner or other liquid detergents.
• Chemicals can cause colour changes of the surface of the appliance.
If you are not going to use the appliance for a prolonged period of time:
1. Unplug the unit, wind the power cord up, and hang it on the back of the appliance.
2. Empty the water tank, wipe it with a cloth and return it to the unit.
3. Clean the air filter.
4. Store the unit in upright position in a dark place, do not place it on the side and avoid direct sunlight.
How to empty the water tank
1. Remove the tank from the unit.
2. Grasp the tank by the handle and move it gently.
3. Tilt the tank and carefully drain water out.
4. Put the tank back in the unit.
0 OV2000
Mode
Automatic
Silent
Drying
Drying
Drying
Continuous
EN
59