Speaker Configuration - Sony XAV-9550ES Help Manual

Item
High Pass Filter Adjusts the cut-off frequency of the front/rear speakers.
Low Pass Filter Selects the cut-off frequency of the subwoofer.
Slope Adjusts the slope of the front/rear speakers and subwoofer.
Phase Selects the subwoofer phase: [Normal], [Reverse].
When [Speaker Configuration] is set to [Front 2-way]:
Item
High Pass Filter Adjusts the cut-off frequency of the front high/mid speakers.
Low Pass Filter Adjusts the cut-off frequency of the front mid speakers and subwoofer.
Slope Adjusts the slope of the front speakers and subwoofer.
Phase Selects the phase of the front speakers and subwoofer: [Normal], [Reverse].
Parametric EQ
When [Speaker Configuration] is set to [Front & Rear]:
Adjusts [Frequency [Hz]], [Gain [dB]], and [Q factor] (quality factor) for 8 points of [Front L], [Front R], [Rear L], [Rear R],
and [Subwoofer].
When [Speaker Configuration] is set to [Front 2-way]:
Adjusts [Frequency [Hz]], [Gain [dB]], and [Q factor] (quality factor) for 8 points of [High L], [High R], [Mid L], [Mid R], and
[Subwoofer].
You can turn the output of each speaker on or off when checking the adjustment effect. When you do not need the effect
of [Parametric EQ], touch [Reset] to make all the channels flat, save to [Custom 1] or [Custom 2], and then select it.

Speaker Configuration

Switches the speaker output depending on the speaker system: [Front & Rear], [Front 2-way].
Note
When connecting the iDataLink Maestro module (not supplied) and you are using the factory amplifier, set [Speaker
Configuration] to [Front & Rear]. (XAV-9500ES(UC))
Related Topic
Basic Setting Operation
Detail
Detail
60