Speaker Connections - Sony XR-1100 Installation/Connections Manual

Speaker connections,
XR-1100
O: Striped cord
White
Gray
I Gris
L
Purple j
Green
Vert
C
Front speakers
_*_ _ Right
Left
Rear speakers
Haut-parleurs arri_re
° "
Right
Notes on speaker connection
• Use speakers with an impedance of 4 to 8 ohms,
and with adequate power handling capacities.
Otherwise, the speakers may be damaged.
• Do not connect the terminals of the speaker
system to the car chassis,and do not connect the
terminals of the right speaker with those of the
left speaker.
• Do not connect the speakers in parallel.
* Do not connect any active speakers (with built-in
amplifiers) to the speaker terminals of the unit.
Doing so may damage the active speakers.
Therefore, be sure to connect passive speakers to
these terminals.
P