Standard Accessories - i-PRO WV-S1536LTN Installation Manual

Standard accessories

Important Safety Instructions ............................ 1 pc.
Adapter box ×1
Adapter box
mounting pin ×1
Other items that are needed (not included)
⿟Mounting screws
Installation method
Directly mount the camera onto the installation surface.
Mount the camera to a two-gangbox/junction box.
Mount the camera using the exclusively designed mount
bracket.
*1 Select screws according to the material of the location that the camera will be mounted to. In this
case, wood screws and nails should not be used.
*2 This value indicates the minimum pull-out strength required value per screw. For information about the
minimum pull-out strength, refer to our technical information website <Control No.: C0120>.
*3 The screw length is an example when installing the camera on a robust installation surface with a
thickness of 20 mm {25/32 inches} or more.
*4 Please consider using anti-corrosive mounting screws or caulking.
⿟Ethernet cable with RJ45 plug (category 5e or better, straight, all 4 pairs (8 pins), less than 100m {328 feet})
⿟As necessary, audio input cable, audio output cable, alarm I/O cable, power supply cable
⿟5 mm {3/16 inches} hexagon wrench
Mounting screw
M4×8 mm {5/16 inches}×2
(of them, 1 for spare)
<WV-S1536LTN>
<WV-S1536LN>
<WV-S1536LNS>
Rain wash coating label
×1 (with ClearSight
coating)
Grommet cover ×1
Grommet ×2
(of them, 1 for spare)
Recommended
screw
M4 × 16 mm
{5/8 inches} ×
4 pcs.*
3, *4
Refer to the operating instructions of each
bracket.
9
RJ45 cap ×1
Minimum pull-out
strength
*1
724 N {163 lbf}
*2