Standard Accessories - i-PRO WV-U31401-F2L Installation Manual

Standard accessories

Important Safety Instructions ............................. 1 pc.
Template 1×
*1 The RJ45 Ethernet cable for easy kitting is attached to the camera.
Other items that are needed (not included)
⿟Mounting screws
Installation method
Directly mount the camera onto the installation surface M4 × 16 mm {5/8 inches}*
Mount the camera to a two-gangbox/junction box.
Mount the camera using the exclusively designed
mount bracket.
*1 Select screws according to the material of the location that the camera will be mounted to. In this
case, wood screws and nails should not be used.
*2 This value indicates the minimum pull-out strength required value per screw. For information about the
minimum pull-out strength, refer to our technical information website <Control No.: C0120>.
*3 The screw length is an example when installing the camera on a robust installation surface with a
thickness of 20 mm {25/32 inches} or more.
⿟ Ethernet cable with RJ45 plug (category 5e or better, straight, all 4 pairs (8 pins), less than 100m {328
feet})
≤33 mm
{1-5/16 inches}
RJ45 Ethernet cable
for easy kitting* 1×
1
Straight section
≤27 mm
{1-1/16 inches}
9 mm
{11/32 inches}
13 mm {1/2 inches}
Recommended screw
× 3 pcs.
M4 × 16 mm {5/8 inches}*
× 2 pcs.
Refer to the operating instructions of each
bracket.
7
Minimum pull-out
*1
strength
*2
3
196 N {44 lbf}
3