Specifications; Optional Accessories; Standard Accessories; Other Items That Are Needed (Not Included) - i-PRO WV-U61300-ZY Installation Manual

Specifications* *

For further information, refer to the "Basic Information".
Power source* : 12 V DC
1
PoE (IEEE802.3af compliant)
Power consumption* : 12 V DC:
1
PoE 48 V DC:
Operating environment:
Ambient operating temperature: –10 °C to +50 °C {14 °F to 122 °F}
(Power on range 0 °C to 50 °C {32 °F to 122 °F})
Ambient operating humidity: 10 % to 90 % (no condensation)
Storage environment:
Storage temperature: –30 °C to +60 °C {–22 °F to +140 °F}
Storage humidity: 10 % to 95 % (no condensation)
EXT I/O terminal: ALARM IN1
(Alarm input 1/ Black & white input/ Auto time adjustment input) (x1)
ALARM IN2 (Alarm input 2/ALARM OUT) (x1)
ALARM IN3 (Alarm input 3/AUX OUT) (x1)
Audio input: ø3.5 mm stereo mini jack
For microphone input: Recommended applicable microphone: Plug-in power type
(Sensitivity of microphone: –51 dB to –38 dB (0 dB=1 V/Pa, 1 kHz))
Input impedance: Approx. 2 kΩ (unbalanced)
Supply voltage: 2.5 V ±0.5 V
For line input: Input level: Approx. –10 dBV
Audio output* : ø3.5 mm stereo mini jack (Audio output is monaural.)
2
Output impedance: Approx. 600 Ω (unbalanced)
Output level: –20 dBV
Dimensions: Maximum diameter: ø131 mm × 128 mm (H)
{ø5-5/32 inches × 5-1/32 inches (H)}
Dome radius: 40 mm {1-9/16 inches}
Approx. 800 g {1.77 lbs}
Mass:
Finish: Main body:
Dome cover: Acrylic resin C
*1 Refer to our technical information website <Control No.: C0106> for further information about Power source
and Power consumption information.
*2 The audio output can be switched to the monitor output. Refer to the "Operating Instructions" on our manual
website for descriptions of how to switch the output.

Optional accessories

Ceiling mount bracket: WV-Q105A
Ceiling mount bracket: WV-QEM501
Technical information website "Accessory Selector" <Control No.: C0501>
890 mA/Approx. 10.7 W
250 mA/Approx. 12 W (Class 0 device)
Aluminum die cast/ ABS resin, i-PRO white
G
(Transmittance: 30 %)
Ceiling mount bracket (ISO): WV-QCL100-W
Ceiling mount bracket (ANSI): WV-QCL101-W
Dome cover: WV-CF5SA

Standard accessories

Installation Guide (this document) ...................... 1 pc.
IMPORTANT SAFETY INSTRUCTIONS .............. 1 pc.
*1 This label may be required for network management. Use caution not to lose this label.
Attachment plate ×1 Template ×1
*2
Cable for easy kitting ×1
*2 The cable for easy kitting and the power cord plug are attached to the camera. Do not use the cable for easy
kitting after kitting work.

Other items that are needed (not included)

• Fixing screw
Installation method
Mount the camera to a two-gangbox/junction box.
Directly mount the camera onto the installation surface.
Mount the camera using the exclusively designed mount bracket.
*1 Select screws according to the material of the location that the camera will be mounted to. In this case,
wood screws and nails should not be used.
*2 This value indicates the minimum pull-out strength required value per screw. For information about the mini-
mum pull-out strength, refer to our technical information website <Control No.: C0120>.
*3 The screw length is an example when installing the camera on a robust ceiling or wall with a thickness of
20 mm {25/32 inches} or more.
• Ethernet cable with RJ45 plug (category 5e or better, straight, 4 pairs (8 pins))
• Tools
Note:
Size information of usable plugs and cables ⇒ Step3
4
Code label* ....................................................... 1 pc.
1
*2
Power cord plug ×1
Recommended
Minimum pull-out
screw* 1
strength*
M4 × 16 mm
196 N {44 lbf}
{5/8 inches} × 4 pcs.* 3
Refer to the operating instructions of each
bracket.
2