Lenovo ThinkPad X12 Detachable Gen 2 Hardware Maintenance Manual page 54

Note: Depending on your computer model, some connectors or cables might not be available.
System board connectors and cables
No.
Connector/feature
1
Microphone assembly connector
(internal)
2
Front camera module connector
(internal)
3
Rear camera connector (internal)
4
P-sensor connector (internal)
5
NFC module connector (internal)
6
Power board connector
7
Speaker connector (near the M.2
solid-state drive slot) (internal)
8
Thermal fan connector (internal)
9
M.2 solid-state drive slot (internal)
10
Built-in battery connector (internal)
11
Pogo pin connector (internal)
12
Volume board connector (internal)
48
ThinkPad X12 Detachable Gen 2 Hardware Maintenance Manual
Internal cable required
The microphone assembly comes
with the cable.
The front camera module comes
with the cable.
The rear camera comes with the
cable.
The wireless-WAN antenna comes
with P-sensor cable.
NFC module cable
Power board cable
The speaker comes with the cable.
The thermal fan comes with the
cable.
No
The built-in battery comes with the
cable.
Pogo pin cable
Volume board cable
Cable connection
The microphone assembly comes
with the cable. Connect the cable
to this connector.
The front camera module comes
with the cable. Connect the cable
to this connector.
The rear camera comes with the
cable. Connect the cable to this
connector.
The wireless-WAN antenna comes
with cables. Connect the P-sensor
cable to this connector.
The NFC module comes with the
cable. Connect the cable to this
connector.
The power board comes with the
cable. Connect the cable to this
connector.
The speaker comes with the cable.
Connect the cable to this
connector.
The thermal fan assembly comes
with cable. Connect the cable to
this connector.
Insert an M.2 solid-state drive into
this slot.
Connect the built-in battery to this
connector.
The pogo pin comes with the
cable. Connect the cable to this
connector.
The volume board comes with the
cable. Connect the cable to this
connector.