Table of Contents
Advertisement
Step 2.
Install the LCD cable in reverse order.
Pogo pin cable
Follow the instructions to replace the pogo pin cable.
For access, remove these FRUs in order:
• "LCD module" on page 56
• "Built-in battery" on page 60
Step 1.
Remove the Pogo pin cable as shown below.
a.
Peel off the pogo pin cosmetic mylar.
b.
Loosen the screws. Disconnect the connector and then remove the pogo pin cable.
66
ThinkPad X12 Detachable Gen 2 Hardware Maintenance Manual
Advertisement
Table of Contents
