I/O bracket
Follow the instructions to replace the I/O bracket.
For access, remove this FRU:
• "LCD module" on page 56
Step 1.
Loosen the screws and then remove the I/O bracket.
Step
Screw (quantity)
1
M2 × L2.5 mm, flat-head, nylon-coated (3)
Step 2.
Install the the I/O bracket in reverse order.
NFC module, NFC module cable, and NFC antenna (for selected models)
Follow the instructions to replace the NFC module, NFC module cable, and NFC antenna.
For access, remove this FRU:
• "LCD module" on page 56
Step 1.
Remove the NFC module, NFC module cable, and NFC antenna as shown below.
a.
Disconnect the connector and then remove the NFC module cable.
78
ThinkPad X12 Detachable Gen 2 Hardware Maintenance Manual
Color
Torque
Black
0.181 Nm
(1.85 kgf-cm)