Table of Contents
Advertisement
When installing: ensure that you connect the orange cable to the main connector, the blue cable to the
auxiliary connector, the white and grey cable to the M1 connector, and the black and grey cable to the M2
connector.
1040 Thermal fan assembly
For access, remove this FRU:
• "1010 Base cover assembly" on page 59
Removal steps of the thermal fan assembly
When installing:
• Ensure that the connector is attached firmly.
• Do not press the top of the fan cover and the fan hub.
• Before you attach the fan assembly to the computer, apply thermal grease, at an amount of 0.2 grams, on
a
the part marked
as shown in the following illustrations. Either too much or too less application of grease
can cause a thermal problem due to imperfect contact with a component.
3e
3e
3c
3e
3a
3b
3d
Chapter 8
3e
.
Removing or replacing a FRU
63
Advertisement
Table of Contents
