Table of Contents
Advertisement
To register your appliance to SmartThings
1. Make sure your smartphone or tablet is connected to a wireless network. If not, go to Settings and turn
on the wireless connection and select an AP (Access Point).
2. Open SmartThings on your smartphone or tablet.
3. If a message of "A new device is found.", select Add.
4. If no message appears, select + and select your appliance in a list of devices available. If your appliance
is not listed, select Device Type > Specific Device Model, and then add your appliance manually.
5. Register your appliance to the SmartThings app as follows.
a. Add your appliance to SmartThings. Make sure your appliance is connected to SmartThings.
b. When registration is complete, your appliance appears on your smartphone or tablet.
If you're moving out, we recommend you completely wipe the appliance and do a network reset on it before
you leave it behind.
If you're moving in, the easiest way to take control and remove the previous user's access is to add it to
SmartThings yourself. But if you don't plan on using SmartThings, a network reset should be performed to
protect your privacy. In rental properties, there's a regular change of ownership. To ensure resident privacy,
Wi-Fi and/or other connectivity settings should be reset at each change of resident. Please refer to factory
reset instructions in this manual.
Untitled-14 59
English 59
2024-02-07
3:53:40
Advertisement
Table of Contents
