Table of Contents
Advertisement
Installation
Clearance requirement
Alcove or closet installations
Minimum clearance for stable operation
Sides
1 in. (25 mm)
If the Laundry Combo is installed in the same location with other washer or dryer, the front of the alcove or
closet must have two unobstructed air openings for a combined minimum total area of 72 in.
Custom cabinet and side-by-side installation
A
A
A
A
CAUTION
Please be aware of the following when installing and using the product.
• After plugging the power plug, make sure the power cord does not get pressed or pinched by the
product while you push it into the final installation position.
-
This could cause fire or electric shock.
• The product must be installed in a place where it can be easily plugged. Otherwise, an electrical leakage
may occur and lead to electric shock or fire.
• Plug the power cord into a grounded 3-prong outlet.
-
Never cut or remove the third (grounding) prong from the power cord under any circumstances.
24
English
Untitled-14 24
Top
1 in. (25 mm)
B
C
D
A
Rear
Front
2 in. (50 mm)
1 in. (25 mm)
A
1 in. (25 mm)
B
1 in. (25 mm)
C
1 in. (25 mm)
D
2 in. (50 mm)
(465 cm
).
2
2
2024-02-07
3:53:33
Advertisement
Table of Contents
