Special Features - Samsung WD53DBA9 H Series User Manual

Special features

Smart Control
You can connect to the SmartThings app and control your Laundry Combo remotely.
Connecting your Laundry Combo
1. Download and open the SmartThings app on your smartphone or tablet (Android & iOS).
2. Tap to turn on the Laundry Combo.
3. Tap and hold .
a. The Laundry Combo enters AP mode and connects to your smartphone or tablet.
b. Tap to authenticate your Laundry Combo.
c. Once the authentication process is complete, your Laundry Combo is successfully connected to the
app.
- You can use various features available in the SmartThings app.
NOTE
• If your Laundry Combo fails to connect with the SmartThings app, try again.
• Check your router if you experience any Internet connection problem after connecting your Laundry
Combo with the SmartThings app.
• If the Wi-Fi is off, tap and hold
• Turning the Laundry Combo's Wi-Fi on allows you connect to the Laundry Combo through the
SmartThings app on your smartphone or tablet, regardless of the power status of the Laundry Combo.
However, the Laundry Combo appears offline on the SmartThings app if the Laundry Combo's Wi-Fi is
off.
• Close the door before starting the Smart Control function.
• If you use your Laundry Combo for a while without connecting it to the SmartThings app, a pop-up
message about Smart Control will show for 3 seconds on 20th, 40th, and 60th use.
• If the Laundry Combo's Wi-Fi is not connected to an AP (access point), the Wi-Fi will turn off when you
turn of the power.
Stay Connect
Set up the Stay Connect function in your SmartThings app to keep Smart Control turned on at the end of a
cycle. Your Laundry Combo stays connected to the app so you can send additional instructions, whether you
are at home or away.
1. If you turn on the Stay Connect function on the SmartThings app, the Laundry Combo will stay in
standby power saving mode after completing a cycle.
- The Stay Connect function will remain active for up to 24 hours if the door remains closed.
2. When the Stay Connect function is active, the Smart Control, Door Lock, and Wi-Fi icons are illuminated
on the LCD display.
3. You can conveniently control your Laundry Combo, adding rinse, spin cycles using the SmartThings app.
Untitled-14 57
> Connections, and then turn the Wi-Fi on.
English 57
2024-02-07 3:53:40