Table of Contents
Advertisement
Operations
Operating a cycle
01
1. Tap
to turn the power on.
2. Select the desired cycle.
-
For more information on Cycle overview, see page 43.
3. Change the default cycle options.
-
For the washing process, tap Temp., Spin, Soil, Detergent, Softener, Extra Rinse, or Bubble Soak to
change the default cycle settings.
-
For the drying process, tap Dryness, Dry Time, Dry Prep, or Wrinkle Prevent to change the default
cycle settings.
-
You cannot set the Dry Time for the Time Dry and Air Fluff cycle.
-
You can select a wash-only cycle or dry-only cycle by tapping the
-
You can set the Delay End function.
-
Not all cycles have additional functions available.
4. Tap
to start the operation.
-
Once you set the cycle you want, the screen displays brief cycle descriptions and cycle duration. You
can also check the cycle progress, remaining cycle time, and information codes.
NOTE
• To change the cycle, tap View All Cycles, and then select the desired cycle.
• After the dry cycle ends, the clothes may feel slightly damp or cool to the touch. This is because the
combo is designed to dry clothes at low heat in a sealed drum. However, you don't need to worry as the
clothes will feel completely dry once you take them out of the drum and shake them.
42
English
Untitled-14 42
02
03
04
or
.
2024-02-07
3:53:38
Advertisement
Table of Contents
