Before You Start; Initial Setup; Run Calibration (Recommended) - Samsung WD53DBA9 H Series User Manual

Before you start

Initial setup

• When you turn on the Laundry Combo for the first time, the screen shows the initial setup process.
Follow the on-screen instructions to complete it.
• Once you select a language, the language selection screen will not reappear. However, you must
complete a wash cycle once to stop the tutorial screen from reappearing.
- You can change the language from the Settings menu. On the Home screen, tap Settings > General >
Language to change the language.
• The initial setup includes language selection and a brief tutorial.
• Tap OK to skip to the next screen.
NOTE
If the initial setup screen does not appear during the first use of the product, it does not indicate a problem
with the product. You can adjust the desired settings by selecting Settings > General from the Home
screen, or reset the product to try running the initial setup process by selecting Settings > General > Reset >
Reset all settings.

Run Calibration (recommended)

Calibration ensures accurate weight detection by the Laundry Combo. Make sure the drum is empty before
running calibration.
1. Tap to turn the power on.
2. Tap > Washer > Calibration.
3. Tap Start Calibration to start the calibration.
30 English
Untitled-14 30 2024-02-07 3:53:35