Table of Contents
Advertisement
en Troubleshooting
Fault
The laundry is too
damp.
Odours have formed
in the appliance.
54
Cause and troubleshooting
Observe the maximum load capacity of the
▶
→ "Programmes", Page 28.
After the end of the programme, warm laundry feels
damper than it actually is.
Remove the laundry from the drum as soon as the
1.
drying programme has finished.
Spread the items of laundry for cooling.
2.
Unsuitable dryness level set.
→ "Changing the dryness level", Page 27.
▶
Drying target not adjusted.
→ "Adjusting the dryness level", Page 27.
▶
Load too small.
Set a timed programme for the subsequent drying.
▶
→ "Programmes", Page 28
Moisture sensor dirty.
→ "Cleaning the moisture sensor", Page 48.
▶
The drying process is interrupted and the condensa-
tion tank has been filled.
→ "Emptying the condensation container", Page 35.
1.
→ "Inserting the condensation container", Page 36.
2.
→ "Starting the programme", Page 33.
3.
Stubborn dirt in the appliance or an extended appli-
ance downtime of more than one month.
Run the intensive appliance care programme.
▶
→ "Appliance care", Page 45
Advertisement
Table of Contents
