Table of Contents
Advertisement
Starting the intensive appliance
care programme
Requirements
The appliance care programme is
¡
ready.
→ "Preparing for appliance care",
Page 45
The appliance care programme is
¡
now called up.
→ "Calling up the appliance care
programme", Page 45
Press
.
1.
"CP2" and the programme dura-
a
tion alternate on the display.
Pour a bottle of the appliance care
2.
product and approx. 1.5 litres of
hot mains water into the condensa-
tion container.
Hold the filled condensation con-
tainer level so that no liquid spills
out.
Insert the condensation container
3.
so that it locks into place.
Press
.
4.
The appliance care programme
a
starts and a signal tone sounds.
After around 3 hours, the appli-
a
ance pauses the appliance care
programme and the remaining pro-
gramme duration flashes on the
display.
Pull out the condensation con-
5.
tainer horizontally and empty it.
Pour approx. 1.5 litres of hot
6.
mains water into the condensation
container.
Carefully swing the condensation
7.
container horizontally and empty it
to rinse out any remaining appli-
ance care product.
Continuing the intensive
appliance care programme
Pour approx. 1.5 litres of hot
1.
mains water into the condensation
container.
Hold the filled condensation con-
tainer level so that no liquid spills
out.
Insert the condensation container
2.
so that it locks into place.
Press
.
3.
The appliance care programme
a
continues.
"End " appears on the display and
a
a signal tone sounds once the ap-
pliance care programme has
ended.
Pull out the condensation con-
4.
tainer horizontally and empty it.
If you are draining the condensa-
5.
tion water using the drain hose:
Remove the stopper from the
‒
underside of the condensation
container.
Insert the stopper into the re-
‒
cess on the top of the condens-
ation container.
Insert the condensation container
6.
so that it locks into place.
Put the appliance into standby
7.
mode.
→ "Put the appliance into standby
mode", Page 33
Appliance care en
47
Advertisement
Table of Contents
