Siemens WQ45B2A0ZA User Manual And Installation Instructions page 15

Table of Contents

Advertisement

Push the water drain hose as far
3.
as it will go into the connecting
piece.
Empty the condensation container.
4.
→ "Emptying the condensation
container", Page 35
Remove the stopper on the under-
5.
side.
Insert the stopper into the recess
6.
in the top.
Installation and connection en
Insert the condensation container.
7.
→ "Inserting the condensation con-
tainer", Page 36
Connect the appliance to the water
8.
outlet.
→ "Water outlet connection types",
Page 15
Tip: To collect condensation in the
condensation container again (e.g. if
you change where the appliance is
located), carry out these steps in re-
verse order.
Water outlet connection types
ATTENTION!
In the event of a blocked or covered
outlet, accumulated wastewater can
flow back into the appliance.
Before operating the appliance, en-
sure that the wastewater drains
away quickly and eliminate any
blockages.
Drainage into a
siphon.
Secure the con-
nection point with
a (12-22 mm)
hose clamp.
Secure the water
outlet hose with
a hose guide at
a height of at
least 80 cm and
no more than
100 cm.
Note: You can
use the Y-distrib-
utor → Page 31
to connect the
water drain hose
of an additional
appliance, such
as a washing
machine, to the
same siphon out-
let.
15

Advertisement

Table of Contents
loading

Table of Contents