Table of Contents
Advertisement
Changing the door hinge and door
hook
Unscrew the door hinge cover.
1.
Unscrew the door hinge and the
2.
door hook.
Screw the door hinge and the door
3.
hook onto the opposite sides.
When you do this, ensure that the
door seal is not trapped or dam-
aged.
Installation and connection en
Screw on the door hinge cover.
4.
When you do this, ensure that the
door seal is not trapped or dam-
aged.
Remove the colour door handle in-
5.
dicator and swap it with the cover
on the opposite side.
Select the position of the door
handle indicator based on the
appliance's installation location:
–
The appliance is installed on
the floor.
–
The unit is installed in a
raised position in a washer-dryer
stack.
17
Advertisement
Table of Contents
