Table of Contents
Advertisement
en Installation and connection
Drainage into a
wash basin.
Drainage into a
gully.
4.5 Aligning the appliance
In order to reduce vibrations and
noises, align the appliance correctly.
To align the appliance, turn the ap-
▶
pliance feet. Check that the appli-
ance is level using a spirit level.
All appliance feet must stand firmly
on the ground.
16
Push the water
drain hose fully
through the el-
bow → Page 12
and secure it us-
ing fixing mater-
ial.
Secure the elbow
at a height of no
more than 100
cm.
Push the water
drain hose fully
through the el-
bow → Page 12
and secure it us-
ing fixing mater-
ial.
Secure the elbow
to the gully.
4.6 Reversing the door
To make it easier to place and re-
move laundry in the drum, you can
change the side on which the door is
hinged.
CAUTION
Risk of cutting!
Touching sharp edges on the appli-
ance may lead to cuts.
Do not touch the sharp edges on
▶
the appliance.
Wear protective gloves when in-
▶
stalling and transporting the appli-
ance.
Notes
Only use a Torx T15 screwdriver
¡
and a Torx T20 screwdriver to re-
move and insert screws.
To prevent material damage, lay
¡
the removed door on a level and
soft surface.
Removing the door
Requirement: The appliance is dis-
connected from the mains.
Open the door.
1.
Unscrew the door.
2.
Advertisement
Table of Contents
