Table of Contents
Advertisement
I
I
a
4
ENGLISH
■Using the Remote Controller
1 Set the [POWER ON/OFF] Switch on the
Movie Camera to [ON].
• When the [CAMERA] Lamp lights, you can use the
recording functions. O
• If you want to use the playback functions, press the
[VCR/CAMERA] Button so that the [VCR] Lamp
lights. £
2
Aim the Remote Controller at the
Remote Control Sensor on the Movie
Camera and press the appropriate
button.
Distance to the Movie Camera: Less than
5
metres.
Angle: Approximately 15° up, down, left and right
from centre axis.
♦ The operative range described above is valid for using
the Remote Controllerindoors,
When using it outdoors or under strong lights, it may
not work correctly even within the above range.
♦ Within a distance of about
1
metre, it is also possible to
use the Remote Controller from the side.
Selecting the Remote Controller Mode
When using two Movie Cameras at the same time,
selecting different Remote Controller Modes makes it
possible to operate them separately.
♦ If the Remote Controller Mode set on the Movie
Camera and on its Remote Controller are not matched,
the [REMOTE] indication appears.
♦ Replacing the button-type battery in the Remote
Controller automatically resets it to the [VCR1] Mode.
♦ Set [REMOTE] on the [MENU(OTHERS)] Menu to the
desired Remote Controller Mode. {-Ml
8
-
122
)
0 Press the H] Button and the [■] Button
simultaneously.
This selects the [VCR2] Mode.
O Press the [I*] Button and the [■] Button
simultaneously.
This selects the [VCR1] Mode.
■ ffifflil £■
1 &ffl^l£%±W[POWERON/OFF]ilMig
SSfON] •
• ^[CAMERA]
0 0
•
• ^mvcr/camerai
ffl • l£[vcR]*fo $
' T '
°
1 fc&StepTte&fclEflfXffc 0
[REMOTE] (iS^)
[VCRIJffiJRo
• »jfc[MENU (OTHERS) IlfcILtftHREMOTE]^ - !£*£
-> (->118-122)
JSH$j8li[VCR2]$ftJ|8 0
0l=)Bf&[|».]*a[B]Sa«
ltjl§M[VCR1]}Ri8o
♦
B
y
ri]
BI
a
>
yi
♦
♦
0
0
Advertisement
Table of Contents
