Table of Contents
Advertisement
Searching for the Beginning of Recorded
Scenes (Scene Index Search)
• Press the [VCR/CAMERA] Button on the Movie
Camera so that the [VCR] Lamps lights.
• Set [SEARCH] on the Menu to [SCENE] .(-»118,124)
• &*»*m±tt[VCR/CAMERA]
{WmWMW
' &[VCR]*g?Efc •
• ^^¥±^[SEARCH](H^)3l|S^^[SCENE](^
*) 0 (*118-124)
Scene Index Search in Forward Direction
Press the Index Button [►w] O on the Remote
Controller.
Scene Index Search in Reverse Direction
Press the Index Button [h*«] © on the Remote
Controller.
• When you briefly press the corresponding button once,
the [Si] Indication appears and the search for the next
scene marked with an index signal starts. After the
Scene Index Search has started, every time you press
the button, the indication changes successively from
[S2] to [S9], and the beginning of the scene
corresponding to the number is located.©
After reaching the desired scene, playback starts
automaticaily.(At a time, Scene index Search in
forward or reverse direction is possible up to the ninth
scene from the present tape position.)
♦ If the distance between two scene index signals is less
than 1 minute, the Scene index Search may not work
correctly.
♦ The Scene Index Search may not work correctly for
scenes recorded near the beginning of the tape.
• If you keep the [Hw] or [►►!] Button pressed for more
than 2 seconds, the Intro Search Function is activated
and it plays back the beginning of all scenes marked
with an index signal on the cassette one after another
for a few seconds each.
{To cancel the Intro Search Function, press the Play
Button [►] © or the Stop Button [■] ©.)
[sim* ■ mwj&wfhsj** °
&mmmm
i ■
mmwmszimum
-
r
£' weftMfcSfcie (m•
♦ mmmmmmmm • mmmmm
iO°)
Advertisement
Table of Contents
