Calrec S2 Operator's Manual page 79

S2
.............................................................................................................................................................................................................................................
PQ4069 STEREO MIC/LINE CHANNEL DIL SWITCHES
SW4 PRE EQUALISER FEED to INSERT GO OUTPUT:-
1 = LEFT FEED }
2 = RIGHT FEED }
SW9 PHANTOM POWER:-
1 = MIC INPUT L }
2 = MIC INPUT R }
SW21 LINE 2 to AUXILIARY 8 OUTPUT:-
LEFT = DISABLE
RIGHT = ENABLE = changed by global switching (for MULTITRACK MONITOR).
SW26 DIRECT OUTPUT PRE FADER FEEDS:-
1 = LEFT FEED }
2 = RIGHT FEED }
SW31 PRE FADER FEED to MULTITRACK:-
1 = LEFT FEED }
2 = RIGHT FEED }
SW38 P.A. INHIBIT (AUX MUTE):-
UP = ON = AUXILIARY OUTPUTS 1 and 2 switched off as fader is closed.
DOWN = OFF = AUXILIARY OUTPUTS not switched off.
SW42 MIX MINUS BUS 1 OUTPUT FEED:-
LEFT = POST FADER
RIGHT = PRE FADER (MONO FEED).
SW46 MIX MINUS BUS 2 OUTPUT FEED:-
LEFT = PRE FADER
RIGHT = POST FADER (MONO FEED).
SW56 LINE 2 REPLAY:-
UP = OFF = Channel input not changed by global switching.
DOWN = ON = Channel input changed to LINE 2 INPUT by global switching.
UP = ON = PRE EQUALISER FEED to INSERT GO when no insert selected.
DOWN = OFF = No feed to INSERT GO when no insert selected.
UP = OFF
DOWN = ON
UP = PRE EQUALISER
DOWN = PRE FADER (POST EQ).
UP = PRE EQUALISER.
DOWN = PRE FADER (POST EQ).
79