Calrec S2 Operator's Manual page 18

S2
............................................................................................................................................................................................................................................
2.3 BQ4070 STEREO LINE CHANNEL
Routing to:
Optional assignable routing to 24 or 32 Multitrack recording outputs normally from Post channel Pan
but switchable to Pre Fader (or Pre Eq internally) or Direct Output (post Direct Output level control).
Pre/post fader: Red/green LEDs. Direct: Yellow LED. M/T Assign: Green LED when channel/group
selected. Enables routing from channel/group and performs forward routing interrogation via Multitrack
Bargraph displays.
OverDUB button releases channel set globally for Multitrack replay to previous setting for over-dubbing.
18
2 Main Stereo outputs, Red LEDs
8 Stereo Groups, Yellow LEDs
Yellow LED.
Balance +3dB control on stereo is inoperative on LB or RB (left to both, right to both
outputs) and becomes an input pan control on LB+RB between left & right inputs to both
left & right outputs.
Φ - Phase reverse button. (L & R)
I/P2 - Selects second Stereo Line input. Green LED.
MS inserts MS/LR convertor: Red LED.
TRIM: +15dB on both Stereo Line inputs.
DIRect Output (stereo) with pre/post fader selection (pre eq internal option) and provision
for talkback injection.
8 Auxiliary Outputs: Common gain control and common pre/post fader selection on 5/
6 and 7/8. 7 & 8 are stereo. Red/green LED indication of pre/post fader selection when
output is selected. Aux 1 & 2 can be muted by PA selection system if required (internal
switch).
MIX MINUS: 2 independent systems with BUS & O/P selection to Direct Outputs.
Internal pre/post fader selection of bus feed Yellow LEDs. A Mix Minus bus can have
several feeds & several outputs - not necessarily the same number. Each output is a
mix of the other bus feeds except its own feed unless the bus is not selected.
4-band Equaliser with 2 parametric mid bands and double shelf selection on LF & HF
bands. LF & HF filters 3-position selection. EQ in/out with Red LED.
Pre & Post fader insert selection with standard level balanced in & out interface. Yellow
LED.
Stereo width control with In/Out selection & Red LED.
Surround selects odd numbered outputs & groups to be L-R and even numbered outputs
& groups to be CENTRE-SURROUND. Aux 8 becomes STEREO SURROUND with
PAN control. WIDTH control becomes FRONT-BACK pan between L-C-R & SUR-
ROUND or SURROUND when width is not selected.
Stereo L/R PAN control.