Calrec S2 Operator's Manual page 20

S2
............................................................................................................................................................................................................................................
20
2.4 XL4071 STEREO GROUP
Routing to: 2 Main Stereo outputs, Red LEDs
Other 7 Stereo Groups, Yellow LEDs
Optional assignable routing to 24 or 32 Multitrack recording outputs normally from
Post channel Pan but switchable to Pre Fader (or Pre Eq internally) or Direct Output
(post Direct Output level control).
Pre/post fader: Red/green LEDs. Direct: Yellow LED. M/T Assign: Green LED when
channel/group selected. Enables routing from channel/group and performs forward
routing interrogation via Multitrack Bargraph displays.
Aux 1-6 from Direct I/P: switches pre & post feeds to Direct I/P circuit. Yellow Led.
Direct I/P Routing to: 2 Main Stereo outputs. Red LEDs.
Direct I/P Routing to: Group Mixer. Yellow LED.
DIRECT I/P: AFL
PFL
CUT
Direct I/P Stereo PAN control.
Direct I/P GAIN control with 10dB in hand at 12 o'clock line-up.
8 Auxiliary Outputs: Common gain control and common pre/post fader selection on 5/6
and 7/8, 7 & 8 are stereo. Red/green LED indication of pre/post selection when output
is selected. Aux 1 & 2 can be muted by PA selection system if required (internal
switch).
DIRect Output (stereo) with pre/post fader selection (pre eq internal option) and
provision for talkback injection.
Pre & Post fader insert selection with standard level balanced in & out interface.
Yellow LED.
LB: Left input to Both outputs.
RB: Right input to Both outputs.
LB + RB: A mono mix of both inputs to both outputs.
: Red LED (Stereo)
: Green LED (Stereo)
: Yellow LED