Calrec S2 Operator's Manual page 4

S2
............................................................................................................................................................................................................................................
Important Health and Safety Information
* This equipment must be EARTHED.
* Only suitably trained personnel should service this equipment.
* Please read and take note of all warning and informative labels.
* Before starting any servicing operation, this equipment must be isolated from the AC
supply (mains) by removing the incoming IEC mains connector.
* Fuses should only be replaced with ones of the same type and rating as that indicated.
* Operate only in a clean, dry and pollutant-free environment.
* Do not operate in an explosive atmosphere.
* Do not allow any liquid or solid objects to enter the equipment. Should this
accidentally occur then immediately switch off the unit and contact your service agent.
* Do not allow ventilation slots to be blocked.
* Do not leave the equipment powered up with the dust cover fitted (where provided).
Please refer to the installation section of the manual for further details.
Cleaning
For cleaning the front panels of the equipment we recommend anti-static screen cleaner sprayed onto a
soft cloth to dampen it only.
Explanation of Warning Symbols
4
The lightning flash with arrow head symbol within
an equilateral triangle is intended to alert the user to
the presence of dangerous voltages and energy
levels within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric
shock or injury.
The exclamation mark within an equilateral triangle
is intended to prompt the user to refer to important
operating or maintenance (servicing) instructions
in the documentation supplied with the product.