Calrec S2 Operator's Manual page 28

S2
............................................................................................................................................................................................................................................
28
2.10 TY3660 TONE/TALKBACK
Master AFL indicator illuminates red when any AFL button is selected or a multitrack
AFL is switched in. Also illuminates AFL LED on ML3661 Monitor Loudspeaker panel.
ON AIR button disables all tone and main talkback functions with remote indication. Red
LED.
Tone oscillator - Red LED, -60dB button - Green LED and PINK noise option - Yellow
LED. Routing to all Groups, Main Outputs and Multitrack - Yellow LEDs.
L2 TO AUX 8: Routes all Line 2 (Line on Stereo channel) to Auxiliary 8 output. Stereo
from stereo channels. Global function on all channels. Yellow LED.
Independent of other input selections - used for Multitrack replay monitor system.
STEREO IDENT: Switches on an internal sequencer which controls switches tone on
the main outputs. EBU sequence or Glits (option).
PSU FAIL - LED & cancel button. Lamp flashes when a PSU or part thereof fails. Cancel
button stops flashing & leaves LED steady red. Second failure or switching on console
resumes flashing.
The Multitrack buttons ROUTE and AFL are used to assign routing from channels or
groups to tracks and perform track AFL. Normally both LEDs are off, but when either
button is pressed the LEDs illuminate appropriately. ROUTE is GREEN, and AFL is
RED.
When the ROUTE LED is GREEN, the console is in assignable routing mode. When
the AFL LED is RED, the console is in Track AFL mode. When neither LED is lit, the
console is i NORMAL mode and both forward and reverse interrogation is available.
If the console is in ROUTE or AFL mode, and no multitrack activity is performed within
20 seconds, the console time out to NORMAL mode, preserving all current settings.
TAPE REP - Globally switches all channels to Tape Replay via Line 2 inputs (LINE
on Stereo) over-riding other sections.
Can be over-ridden by OVERDUB
button on channels. Green LED.
TALKBACK MIC and Gain control.
EXT & RTB. (Reverse talkback) Line
and mic level inputs to PFL
loudspeaker.
TALKBACK momentary routing as
shown.