Calrec S2 Operator's Manual page 16

Table of Contents

Advertisement

S2
............................................................................................................................................................................................................................................
2.2 PQ4069 STEREO CHANNEL
Routing to:
Optional assignable routing to 24 or 32 Multitrack recording outputs normally from Post channel Pan
but switchable to Pre Fader (or Pre Eq internally) or Direct Output (post Direct Output level control).
Pre/post fader: Red/green LEDs. Direct: Yellow LED. M/T Assign: Green LED when channel/group
selected. Enables routing from channel/group and performs forward routing interrogation via Multitrack
Bargraph displays.
OverDUB button releases Channel set globally for Multitrack replay to previous setting for over-dubbing.
Yellow LED.
16
2 Main Stereo outputs, Red LEDs
8 Stereo Groups, Yellow LEDs
48V phantom power button. Red LED.
Balance +3dB control on stereo is inoperative on LB or RB (left to both, right to both
outputs) and becomes an input pan control on LB+RB between left & right inputs to both
left & right outputs.
ΦL, ΦR Phase reverse left & right.
LINE selects Line input: Changes Red LED (Mic) to Green.
MS inserts MS/LR convertor: Red LED.
Coarse gain rotary switch: 6dB steps - Restricted Line range.
TRIM: +6dB Mic & Line.
DIRect Output (stereo) with pre/post fader selection (pre eq internal option) and provision
for talkback injection.
8 Auxiliary Outputs: Common gain control and common pre/post fader selection on 5/
6 and 7/8. 7 & 8 are stereo.
Red/green LED indication of pre/post fader selection when output is selected. Aux 1 &
2 can be muted by PA selection system if required (internal switch).
MIX MINUS: 2 independent systems with BUS & O/P selection to Direct Output. Internal
pre/post fader selection of bus feed. Yellow LEDs. A Mix Minus bus can have several
feeds & several outputs - not necessarily the same number. Each output is a mix of the
other bus feeds except its own feed unless the bus is not selected. 4-band Equaliser
with 2 parametric mid bands and double shelf selection on LF & HF bands. LF & HF
filters 3-position selection. EQ in/out with Red LED.
Pre & Post fader insert selection with standard level balanced in & out interface.
Yellow LED.
Stereo width control with In/Out selection & Red LED.
Surround selects odd numbered outputs & groups to be L-R and even numbered outputs
& groups to be CENTRE-SURROUND. Aux 8 becomes STEREO SURROUND with
PAN control. WIDTH control becomes FRONT-BACK pan between L-C-R & SUR-
ROUND or SURROUND when width is not selected.
Stereo L/R PAN control.

Advertisement

Table of Contents
loading

Table of Contents