Comprehensive distance
corrections (ppm)
CO
IN
ID
PM
FS
SC
OC
IO
AR
RC
EG
CA
CT
BC
DF
SD
TS
IX
76
A distinction is made between atmospheric (ppm) and
geometric (ppm) corrections, the sum of which is used
as the final distance correction.
• Atmospheric correction
The atmospheric distance corrections are derived from
the dry-air temperature, air pressure or height over
mean sea-level, and relative air humidity or wet-air
temperature.
MEAS\ ATMOSPHERIC CORR.
Temperature
Atm. press.
Temp.wet-b.
ppm atmospheric
ppm geometric
ppm total
GEOM
REFRA P<>E
HELP
F1
F2
Settings for the geometrical correction.
Settings for the refraction correction.
Toggle between air pressure and height above mean
sea-level.
Toggle between relative air humidity and wet-air
temperature.
Set the atmospheric ppm to "0.00". (Individual
parameters are set to the standard atmospheric values,
corresponding to the atmospheric correction ATM=0)
The dialog is dependent on the setting within
"FUNCTIONALITY".
TPS-System 1000-2.3.1en
14:03
:
12.0
:
1013.3 mBar
:
:
:
:
%<>T' ATM=0 EDIT
F4
F3
°C
0.0
0.0
0.0
0.0
EDIT
F5
F6
© Leica