Operation - Leica TPS 1000 Series Manual

CO
IN
ID
PM
FS
SC
OC
IO
AR
RC
EG
CA
CT
BC
DF
SD
TS
IX
146
For TCA instruments the parameters for Automatic
Target Recognition ATR1 are assigned to the function
keys , ,
aF... .
ATR1 mode
This mode permits measurements to static targets.
aF...\ADDIT. FUNCTIONS
1 User template & files
2 EDM measuring program
3 Compensator/Hz-corrections
4 EDM Test (Signal/Frequency)
5 Beep / Hz-sector
6 V-Angle display
ATR LOCK
HELP
F1 F2
Switches the automatic target recognition ON for the
ATR1-mode.
The display returns immediately to the previous dialog.
Calling the aF... - dialog again and pressing
switch the ATR1-mode OFF once more .
The operator must sight the prism coarsely using the
optical sight, so that the prism is within the field of
view.
Activating a distance measurement moves the
crosshair close to the centre of the prism with the help
of the motors, to permit a distance measurement.
If the prism is outside the sensitive area of the ATR1,
the telescope's field of view is scanned using a spiral
movement to search for the prism. Thereafter the
distance is measured.
TPS-System 1000-2.3.1en
and under the fixed key
14:03
L.INT LAST
F4 F5
F3
F6
will
© Leica