Remarks - Leica TPS 1000 Series Manual

Remarks

© Leica
Choose the prism from 6 possibilities : Leica circular
prism, retro tape target (not in the T/TM versions),
Leica 360° prism, 3 user-defined prisms.
Setting the atmospheric ppm and the geometric ppm
(height and projection) and the refraction coefficient.
Enter a manually-measured horizontal distance.
Enter the data for an eccentric target point.
Change between individual and running point number.
Supplementary information entered (remarks, type of
point, topological data etc.) can be stored under
"Remarks" .
The remarks must be defined in the recording
template. They are stored along with every
measurement. The value is retained until it is changed.
If the remarks are defined in the display template, they
can be entered directly in the measurement dialog.
Additional information can also be stored in code
blocks instead of under "Remarks". For detailed
information about the use of additional information,
refer to the chapters "Code information" and "Data
format".
TPS-System 1000-2.3.1en
CO
IN
ID
PM
FS
SC
OC
IO
AR
RC
EG
CA
CT
BC
DF
SD
TS
IX
71