Table of Contents
Advertisement
EN
Operation
General operation
1. Check the product, its battery pack and charger as well as accessories for
damage before each use. Do not use the product if it is damaged or shows
wear.Take care of any problem you find or have the product checked by
qualified specialist.
2. Double check that accessories or attachments are properly fixed.
3. Always push the product using the grip handle (2). Keep the handles dry to
ensure safe support.
4. Ensure that the air vents are always unobstructed and clear. Clean them if
necessary with a soft brush. Blocked air vents may lead to overheating and
damage the product.
5. Switch the product off immediately if you are disturbed while working by
other people entering the working area. Always let the product come to
complete stop before putting it down.
6. Do not overwork yourself. Take regular breaks to ensure you can
concentrate on the work and have full control over the product.
Starting/Stopping
WARNING! Before starting, put the product on a flat surface free of
high grass! Clean the underside of the deck!
Start the motor carefully according to instructions. Keep your feet well
away from the cutting blade (12d)!
Do not tilt the product when starting the motor.
Starting / stopping
NOTE: The product can only be started by pressing the safety
switch button (1) followed by squeezing the start levers (3). Reverse
operation cannot start the product.
1. Install the battery pack (22) into the battery compartment.
2. Insert the safety key (16) into the slot fully (Fig. 18).
3. Stand behind the grip handle (2).
4. While holding the safety switch button (1) pressed (Fig. 19, step 1), pull the
start levers (3) towards the grip handle (2) (Fig. 19, step 2).
5. After the mower starts, release the safety switch button (1).
6. The product starts moving forward and begins mowing.
7. Release the start levers (3) to stop the mower.
26
TTT838LWM-Li by TITAN
Advertisement
Table of Contents
