Table of Contents
Advertisement
TTT838LWM-Li by TITAN
NOTE: Always carry the grass catcher (6) by its handle (6a).
Before hooking the grass catcher (6), check if the mulching insert (21)
is in the rear discharge chute (20). Take away the mulching insert (21)
before hooking the grass catcher (6).
NOTE: The mulching insert (21) must be removed if the grass catcher
(6) is used.
Battery pack
Attaching the battery pack
1. Remove the safety key (16) and keep it avoid loss (Fig. 8, step 1).
2. Hold the groove (15a) and open the battery cover (15) (Fig. 8, step 2).
3. Slide the battery pack (22) into the slot (15c) of battery compartment (Fig. 9,
step 1).
4. Make sure that the electrical contacts (15b) are fully inserted into the battery
pack and that it snaps in place with a click.
5. The battery pack (22) can only be installed in one direction.
6. Close the battery cover (15).
7. Reinstall safety key (16) to its slot (Fig. 9, step 2).
2.
15a
Fig. 8
Fig. 8
Releasing the battery pack
The battery pack (22) can't be charged whilst in the mower. Remove the battery
pack (22) from its battery compartment for charging.
1.
16
15
Before you start
1.
15c
15b
Fig. 9
Fig. 9
EN
22
2.
16
15
19
Advertisement
Table of Contents
