Advertisement
RECORDI NG
(Deck HI only)
Load a tape for recording in Deck II.
.
Set the DOLBY NR switch.
3.
Set the REV MODE switch.
® To record on one side only, set the switch to the ==
position.
(*") button to begin recording.
No
To Stop Recording Temporarily
Press the pause ( ««) button.
To Stop Recording
Press the stop (IE) button.
ADJUSTING THE RECORDING LEVEL
NOTES:
10
<RRB1087>
-
Erasure Prevention Tabs
| RECORDING MUTE
eration of the music search function,
Erasing a Tape
tape into Deck II.
Set the REV MODE switch.
3.
Set the tape transport direction.
® Tape copying is always performed in the direction indicated by
the tape transport indicator {Pm or <€). To change this direction,
Press the desired playback {P or <) button, then immediately
press the stop (#%) button.
4.
Press one of the SYNCHRO COPY buttons to
select either NORMAL or HIGH SPEED.
XN
{COPY indicator flashes). Playback will stilf
be audible.
Advertisement
