Advertisement
TROUBLESHOOTING
SYMPTOM
There is too much noise.
@ A noisy tape is being used.
® There is a faulty connection.
®@ Recording level is too low.
@ The heads are magnetized.
REMEDY
® Repiace the cassette tape.
® Check ail connections {see page 5}
@ Turn the REC LEVEL control up (see page 10)
@ Demagnetize the head with a demagne' zer (
suddenly when the power is
turned on,
OTHER
———
en
ope
tee rio
| The music search function
®@ Blanks between selections are less than 4
|
é
/ does not operate properly.
seconds long.
4 seconds.
Recording or playback starts
@ TIMER switch is set to PLAY or REC.
@ Set TIMER switch to OFF.
System remote control does
not operate.
®@ Control cord is not connected.
CD 'DECK SYNCHRO record-
ing cannot be carried out.
—
@ CD -DECK SYNCHRO control cord and Input/Output
cords are not connected.
@ The cassette tape accidental erasure prevention tabs
are broken.
© Connect control cord properly (see page 5).
@ Connect correctly (see page 5)
@ Replace the cassette with one whose tabs are intact
{see page 4).
The CD SYNCHRO indicator
is off during CD -DECK
® The tape ran out during the CD -DECK SYNCHRO
mode.
,
SYNCHRO recording.
® After the deck entered recording standby mode, more
than 1 minute elapsed before the CD player resumed
playback.
14
<RRB1087>
®@ Replace the tape with a longer one.
@ Change the disc and press the CD SYNCHRO button
again.
Advertisement
