Advertisement
CONNECTIONS
|
2
|
|
|
|
Control cord
CD -DECK SYNCHRO
as improper connections may generate noise.
Use the enclosed Remote Control Cord to connect this jack to the CON-
rr
nme
s
TROL OUT jack of another component which bears the al mark to indi-
CONNECTING
THE
RECORDING
AND
cate that it is equipped with PIONEER System Remote Control. You will
[ PLAYBACK
CORDS
then be able to operate this deck using the other component's PIONEER
-——_!
system remote
control unit
If the remote control unit does not have
(ee
separate buttons for Deck I and Deck Il, or a selection button to choose
Left channel
Deck | or Deck Il; the buttons will only operate Deck Il. To operate Deck |
White plug
with a remote control unit which was not designed for double deck
«
cassette decks; see page 7.
CONTROL OUT jack
|
ke a
Intermediary jack which outputs signals from the CONTROL IN jack of
|
Right channel
this deck to the input jeck of another component. Connect this jack to
Red plug
the CONTROL IN jack of another component compatible with PIONEER
Pees
if.
See
aes
System Remote Control.
Connect the TAPE jacks of your amplifier to the UNE jacks of the
Sa
™
cassette deck. Be sure to connect the REC (INPUT) jacks of the deck to
CD -DECK
SYNCHRO
RECORDING
|
the recording (output) jacks of the amplifier, and the PLAY {OUTPUT}
—
jacks of the deck to the play (input) jacks of the amplifier.
®
CD-DECK SYNCHRO recording can be carried out when this deck is
©
Connect the plugs properly:
connected
to a PIONEER
CD
player equipped
with
a CD -DECK
Left channel — White plug
SYNCHRO control jack.
Right channel — Red:plug
Connection
CONNECTING
THE POWER CORD
Connect the CD -DECK SYNCHRO jack of the deck to the CD -DECK
SYNCHRO
jack
of the
CD
player
using
the
enciosed
CD -DECK
insert the power cord of the cassette deck into the accessory AC outlet
SYNCHRO control cord.
of your amplifier, or into a normal household outlet.
@
When performing unattended recording or wake-up playback, consult
NOTES:
the operating instructions of your audio timer for details on power
®
Keep the input and output jacks connected between the amplifier and
cord connections.
the deck. Otherwise, CD-DECK SYNCHRO recording cannot be carried
out.
@
Even when the CD player is connected to the amplifier with an optical
fiber cable, connect the CD player to either the amplifier or this deck
with pin plug input and output cords.
5
<RRB1087>
Advertisement
