Table of Contents
Advertisement
ANTI-SPLINTERING SHOE POSITION
(Turn OFF and UNPLUG saw)
Your saw is equipped with an anti-splintering shoe which is particularly useful
when cutting plywood. To help control splintering for a smoother cut, loosen
(do not remove) the screw in the bottom of the shoe, as shown in Figure 1.
Slide the shoe back, as shown in the figure, as far as it will go. Tighten the
screw to hold the shoe in this position.
NOTE: The anti-splintering position of the shoe can only be used when the
blade is in the straight (0" bevel) setting. (Do not cut metal with the shoe
in the anti-splintering position.)
FIGURE 1
5
l
Slide
Shoe
Back
Advertisement
Table of Contents
