Black & Decker M-47 Series Instruction Manual page 2

I
7543-04 & 7548-04 JIG SAWS
INTRODUCTION
Your new jig saw has been engineered for versatility and rugged use. Whether
you have the 7543·04 Single Speed Jig Saw or the 7548·04 Variable Speed
model you can be assured that it was built to Black
&
Decker's rigid quality
standards that have made ours the name to count on for over 70 years.
Our innovative
M-47
Series motor design makes it possible to reduce the
overall size of the tool without sacrificing any power. The smaller size puts
the handle closer to the work surface for better control and allows cutting
in tight spots that isn't possible with conventional jig saws.
Features like anti-splintering shoes and full bevel adjustment left and right
make these excellent values that will serve you for years to come.
Don't forget to send in your owner's registration card.
Thanks for selecting Black & Decker!
IMPORTANT SAFETY INSTRUCTIONS (For All Tools)
WARNING When using Electric Tools, basic safety precautions should
always be followed to reduce the risk of fire, electric shock, and
personal injury, including the following:
READ ALL INSTRlJCTI(JIG
1. KEEP WORK AREA
CLEAN. Cluttered -
and benches invite
injuries.
2.
CONSIDER
WORK AREA ENVIRONMENT. Don1 expose
power tools
to rain. Oon1 use power tools in danp or wet locations. Keep work
area well lit.
3. GUARD AGAINST ELECTRIC SHOCK. Prevent body contact with
grounded surfaces. For example: pipes, radiators, ranges,
refrigerator enclosures.
4. KEEP CHILDREN AWAY. All visitors should be kept away from work
area. Do not let visitors contact tool or extension cord.
5. STORE IDLE TOOLS. When not in use, tools should be stored in
dry, and high or locked-up place - out of reach of children.
6. DON'T FORCE TOOL. It will do the job better and safer at the rate
for which
it
was intended.
7. USE RIGHT TOOL Don't force small tool or attachment to do the job
of a heavy-duty tool. Don't use tool for purpose not intended, for ex-
ample, don't use circular saw for cutting tree limbs or logs.
8. DRESS PROPERLY. Do not wear loose clothing or jewelry. They can
be caught in moving parts. Rubber gloves and nonskid footwear are
recommended when working outdoors. Wear protective hair covering
to contain long hair.
9. USE SAFETY GLASSES. Also use face or dustmask if cutting opera·
tion is dusty.
10. DON'T ABUSE CORD. Never carry tool by cord or yank it to discon-
nect from receptacle. Keep cord from heat, oil, and sharp edges.
11. SECURE WORK. Use clamps or a vise to hold work. It's safer than
using your hand and it frees both hands to operate tool.
12. DON'T OVERREACH. Keep proper footing and balance at all times.
2